Forum Discussion

New Contributor

6 years ago

Received a new 10M08 Evaluation Kit from DigiKey. The instruction blurp with the board says to plug it into USB connector and the 5 red LEDs should flash. When I plug it in, the red LEDs come on and stay that way (no flashing). The green LED also comes on

Have tried numerous USB ports on different computers and several wall wart USB with 0.5A to 2.5A ratings. No flashing of LEDs. Have connected a USB Blaster JTAG and it Auto-Detects the 10M08SA devic...

KBerg10

New Contributor

6 years ago

19.1 Lite

USB Blaster

Also, just found this: https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/solutions/rd12082014_64.html

Forum Discussion

Received a new 10M08 Evaluation Kit from DigiKey. The instruction blurp with the board says to plug it into USB connector and the 5 red LEDs should flash. When I plug it in, the red LEDs come on and stay that way (no flashing). The green LED also comes on

Recent Discussions

Agilex5 Eagle ES, NIOS-V + TSE IP

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Agilex5 HPS2FPGA usage