Received a new 10M08 Evaluation Kit from DigiKey. The instruction blurp with the board says to plug it into USB connector and the 5 red LEDs should flash. When I plug it in, the red LEDs come on and stay that way (no flashing). The green LED also comes on

Anand,

See attached for results. When Auto Detect is used it list three choices (none of which are 10M08DAF).

The chip markings is 10M08SAE144C8G

From Auto Detect have tried both 10M08SA and 10M08SAES, neither works.

Have tried both pof and sof file.

Have compiled with both 10M08SAE144C8G and 10M08SAE144C8GES.

Tried all combinations of above options.