Forum Discussion

KBerg10's avatar
KBerg10
Icon for New Contributor rankNew Contributor
6 years ago

Received a new 10M08 Evaluation Kit from DigiKey. The instruction blurp with the board says to plug it into USB connector and the 5 red LEDs should flash. When I plug it in, the red LEDs come on and stay that way (no flashing). The green LED also comes on

Have tried numerous USB ports on different computers and several wall wart USB with 0.5A to 2.5A ratings. No flashing of LEDs. Have connected a USB Blaster JTAG and it Auto-Detects the 10M08SA devic...
AnandRaj_S_Intel's avatar
AnandRaj_S_Intel
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

  1. Auto detect select and select the device 10M08DAF
  2. right click ->select change the file ->navigate to .pof file and select it.
  3. click on program.

share image of auto-detect.

Regards

Anand