Forum Discussion

KBerg10's avatar
KBerg10
Icon for New Contributor rankNew Contributor
6 years ago

Received a new 10M08 Evaluation Kit from DigiKey. The instruction blurp with the board says to plug it into USB connector and the 5 red LEDs should flash. When I plug it in, the red LEDs come on and stay that way (no flashing). The green LED also comes on

Have tried numerous USB ports on different computers and several wall wart USB with 0.5A to 2.5A ratings. No flashing of LEDs. Have connected a USB Blaster JTAG and it Auto-Detects the 10M08SA devic...
KBerg10's avatar
KBerg10
Icon for New Contributor rankNew Contributor
6 years ago

Received another new 10M08 Eval Kit (thinking first one was defective) and same results. No blinking at USB power plug in. Tried using sof file, no luck. Tried pof, no luck,

Changed Device from ES to without ES, recompiled, still no luck.

See attachment.