Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Re-configure the NEEK's LCD daughter card

Please advice how to re-configure (to change pin assignments) the CPLD on the Terasic LCD daughter card for the NEEK (Cyclone III Evaluation Kit). TIA
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

First, unplug the start board two jumpers, JP1& JP2. Then connect you usb-cable and click the "auto detect" button in the Quartus Programmer. After doing this, you will see the MAXII device showed up in your JTAG chain.