Forum Discussion

Armando1989's avatar
Armando1989
Icon for Occasional Contributor rankOccasional Contributor
2 years ago
Solved

Quartus simulation differs from board results

Hi there! Recently purchased board from Aliexpress with EPM570T100C5 in it Just programmed simple overflow accumulator as used in old fractional N synthesizer schemes. Mine with registered ouput fo...
Board Debug
  • FvM's avatar
    FvM
    2 years ago
    clk9600 has most likely glitches in real hardware. Try to set in registered rather than combinational assignment.
HubertG's avatar
HubertG
Icon for Contributor rankContributor
1 year ago

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum case, did not reach us as intended. As a result, we have a backlog of cases that we are currently working through.

Please be assured that we are doing everything we can to resolve this as quickly as possible. This will take some time, and we appreciate your patience and understanding during this period of time. Your case will be attended by AE soonest possible.

Thank you again for your patience and understanding, and we are committed to provide you with the best possible support.