Forum Discussion

Ms_G's avatar
Ms_G
Icon for New Contributor rankNew Contributor
3 years ago

Quad SPI flash IO Voltage

Hi, I am using winbond quad spi flash - all 4 flash IOs are connected to Cyclone 10 FPGA. 2 IOs are connected to Bank 1, which is at 2.5VDC level 2 IOs are connected to Bank 8, which is at 3.3VD...
Fpga Devkit
Ms_G's avatar
Ms_G
Icon for New Contributor rankNew Contributor
3 years ago

Adding more details

- CS, CLK, DATA0, DATA1 - 2.5 VDC level

- DATA2, DATA3 - 3.3 VDC level