Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Programming FPGA chip

If I want to implement a single FPGA chip on a PCB which is the transciever that I want to design using the Eagle program. :confused: So how can I get a single FPGA chip and program then use it...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Thanks for your reply Daixiwen.

But I want to ask you Is your reply is applied on the DE-70 board from altera.

You can find it in this site :

http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=39&no=226

Because I'm thinking about graduation project that contains the following topics :

1- a main computer which contains :

a-OFDM Transciever for data and video image written by vhdl.

b-Face detection & recognition written by c++ conatins classes.

c-Speaker Identification written by matlab.

d-Commands Recognition written by matlab.

e-Simple OS for controlling a camera and displaying the video on the touch LCD.

2-multiple cameras for sending video data using ofdm modulation.

so i need to integrate between all the codes using the matlab.

And you know it's not easy to convert between the languages.

By using the DE-70 board as a main computer for the previous topics. So I need to send the video data using OFDM So I need a fpga connected to the cameras because i want to use fft and ifft transform. So what should I do without using a board or kit for each camera?

I want to build a simple board not to buy maybe DE-70 boatrd for each camera?

i'm confused

please help me.