Forum Discussion
YCher6
New Contributor
New ContributorProblem with FPPx16 configuring cyclone V over USB cypress
Hello, I'm working on a setup with the cylone V (5ceba9f31c8), which uses cypress FX3 usb controller as the passive parallel x16 initialisation device. I'm using xilinx programmer module in cypress...
NurAiman_M_Intel
Super Contributor
Super ContributorHi Yuri,
Have you tried to refer to Cyclone V Handbook for FPPx16 and Pin Connection guidelines?
Below are the link:
Handbook: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/a10_handbook.pdf?wapkw=arria%2010%20handbook
Pin guidelines: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/dp/cyclone-v/pcg-01014.pdf
Let me know if you need further information.
Thank you.
