Forum Discussion

New Contributor

6 years ago

Problem with FPPx16 configuring cyclone V over USB cypress

Hello, I'm working on a setup with the cylone V (5ceba9f31c8), which uses cypress FX3 usb controller as the passive parallel x16 initialisation device. I'm using xilinx programmer module in cypress...

YCher6

New Contributor

6 years ago

sorry, The .rbf file that I export from quatrus is for the correct device and passive PARALLELx16 configuration of course

Forum Discussion

Problem with FPPx16 configuring cyclone V over USB cypress

Recent Discussions

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work

PCIe Root Complex on DK-A5E013BM16AEA