Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

PCIe Dev Kit SFP interface

Hey all, I've been working with a PCIe Stratix II GX dev board that has two on-board SFP channels available as possible high speed in/outputs. So far I'm just trying to do a basic Hello World sce...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

hi, I also have the same dev board.

I am currently using:

Quartus II 7.1 full version with full license.

Open Core plus.

my NIOS 2 system is not functioning. It only includes nios2, JTAG UART, PIO, onchip ram and PLL to slow down the clock.

I used the hellow pio example in the nios IDE. not working.

hellow world small example, not working.

when I check run the hellow world application in Hardware, I got the following error from the IDE console:

Using cable "USB-Blaster [USB-0]", device 2, instance 0x00

Pausing target processor: not responding.

Resetting and trying again: FAILED

Leaving target processor paused

do you have this problem you are using this board for nios 2 development? Thank you.