Forum Discussion

colinz's avatar
colinz
Icon for New Contributor rankNew Contributor
2 years ago

oneAPI for Intel PAC Arria 10

I have two questions about oneAPI support for Intel PAC Arria 10: 1. There is "Install Intel PAC BSPs" section in the installation guide from oneAPI base kit 2023.0 (https://www.intel.com/content/ww...
Fpga Devkit
BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
2 years ago

Hi @colinz,


Assuming the mention situation are not related to Intel DevCloud, but you have PAC A10 GX board which you would like to setup locally without involving DevCloud.

Short answer is yes, the latest oneAPI do support A10 GX PAC board, you can find the BSP and the quartus version required in the following link below:

- https://www.intel.com/content/www/us/en/developer/tools/oneapi/fpga.html


Hope that clarify.


Regards

BB



  • colinz's avatar
    colinz
    Icon for New Contributor rankNew Contributor
    2 years ago

    Thank you! Yes, I have PAC Arria 10 GX board and I want to setup locally.

    The link you provided seems only have BSP and Quartus requirements for the FPGA platforms from BittWare or Terasic, etc. Is it possible you can guide me to the links related to A10 GX board? Thanks again.