Forum Discussion

himanshuvaria's avatar
himanshuvaria
Icon for Occasional Contributor rankOccasional Contributor
2 years ago
Solved

NIOSV Processor boot from QSPI Flash on MAX 10 Dev Kit

Hello, I want to boot a NIOSV software image from External QSPI Flash on the Max 10 development KIT. Max 10 Dev Kit Part No: 10M50DAF484C6GES Below is the QSPI Flash Part No. that used in MAX 10 D...
Fpga Devkit
  • KellyJialin_Goh's avatar
    KellyJialin_Goh
    2 years ago

    Hi,

    I have checked the Generic Serial Flash Interface Intel® FPGA IP User Guide.

    The supported flash devices for configuration memory are, EPCQ, EPCQ-A, EPCQ-L, and

    Micron* MT25Q (256Mb to 2Gb) devices. Unfortunately N25Q512A83 is not supported for booting NIOSV with MAX10 device.


    Hope this clear your doubts.


    Thank you.


    Regards,

    Kelly


KellyJialin_Goh's avatar
KellyJialin_Goh
Icon for Frequent Contributor rankFrequent Contributor
2 years ago

Hi,

Any updates from your end whether the information and documents provided was useful to solve your issue?


Thank you.


Regards,

Kelly