Forum Discussion

New Contributor

1 year ago

NCONT ERROR in ACK for access 0 : ACK = 0x01 in ARM DS

Hi team, In our custom board, we use AGFB014R24B_3 FPGA SoC. The program is stuck at clock initialization when I run the u-boot-spl using ARM DS. Further, I step into the clock initiali...

Board Debug

Jeet14

Frequent Contributor

11 months ago

Hi,

I hope you have re-generated the uboot and u-boot-spl-dtb.hex files.

Also made the necessary changes in the socfpga_agilex_socdk-u-boot.dtsi file w.r.t. your custom design.

Please refer below link to generate the uboot.

https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderAgilex7#Build_U_45Boot

Regards

Tiwari

Forum Discussion

NCONT ERROR in ACK for access 0 : ACK = 0x01 in ARM DS

Recent Discussions

Stratix 10 FPGA Dev Kit VCCIO_FMC voltage issue

A question about reading the configuration space of the R-Tile PCIe IP EP

Regarding Quartus Prime License Activation for the Agilex 5 Evaluation Kit

Stratix 10 Development Kit HiLo connector

Mandelbrot viewer on Cyclone V - Platform Designer layout