Forum Discussion
Veerappan
New Contributor
New ContributorNCONT ERROR in ACK for access 0 : ACK = 0x01 in ARM DS
Hi team, In our custom board, we use AGFB014R24B_3 FPGA SoC. The program is stuck at clock initialization when I run the u-boot-spl using ARM DS. Further, I step into the clock initiali...
VeerappanNew Contributor
New ContributorHi,
In socfpga_agilex_socdk.dts the HPS EOSC frequency is 25MHz.
soc {
clocks {
osc1 {
clock-frequency = <25000000>;
};
};
};
Thanks,
Regards,
Veerappan P.
