Forum Discussion
KMANO3
New Contributor
New ContributorMAX10 series -10M02SCE144I7G FPGA powered from 3.3V on all IO's will support open drain 1.05V input ?
in our system we have a processor input signal voltage level of 1.05V connected to the FPGA i/o which is in 3.3V power rail. can FPGA detect logic values from 1.05V or , does it require a separate p...
Rahul_S_Intel1
Frequent Contributor
Frequent ContributorHi Kumaran,
Please note that for the IO to detect values there need to analysis
One is : I/O standard
Second one VIL and VIH
Page no: 19
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/max-10/m10_datasheet.pdf
Please make sure that the above parameters is matching.
