Forum Discussion

MAX10_nios2_terminal's avatar
MAX10_nios2_terminal
Icon for New Contributor rankNew Contributor
2 years ago

MAX10 10M50 Development kit

Hi to the community, I'm seeking your assistance with an issue I've encountered while working with an ex-Altera FPGA board, specifically the MAX10M050 family. My goal is to connect this board to my ...
Board Debug
wwanalim_intel's avatar
wwanalim_intel
Icon for Contributor rankContributor
2 years ago

Hi,


It seems the nios2-terminal.exe is working but there is a bug on the system. Unfortunately, version 22.1 is not tested on Windows 11. We would suggest migrating to version 22.3 as it is first Quartus to support Windows 11 and before version 22.4 which has a few known issue.


Below link refer to the Operating System support related to the Quartus Version.

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-software/os-support.html


Thank you.


Regards,

Fathulnaim


  • MAX10_nios2_terminal's avatar
    MAX10_nios2_terminal
    Icon for New Contributor rankNew Contributor
    2 years ago

    Hi,

    Something to note is that I've discovered that I can program the FPGA using Quartus 22.1 for free, using a .sof file. Will I encounter any issues as I proceed with implementing basic programs and programming it in this manner?

    Thanks again.

    Regards,

    Kostis A.