Forum Discussion

Icon for New Contributor rank

New Contributor

2 years ago

Solved

MAX10 10M08 developement Board

Hello

I want to buy EK-10M08E144 development board but I am confused about that how can I program this FPGA in kit?

Please clarify that in that kit has in-circuit serial programming or not.

I have to buy separately USB blaster or not for programming only.

Please let me know if you have better suggestion to buy another board of MAX10.

FvM
2 years ago
Hi,
EK-10M08E144 needs an external USB-Blaster or compatible programming adapter. There are other economic MAX10 development modules with built-in USB Blaster function, e.g. this one
https://shop.trenz-electronic.de/en/TEI0001-04-DBC83A-MAX1000-IoT-Maker-Board-8kLE-8-MByte-SDRAM-8-MByte-Flash-6.15-x-2.5-cm?c=21

Regards
Frank

6 Replies

NazrulNaim_Intel
Regular Contributor
2 years ago
Hi,
Thank you for reaching out. Allow me some time to look into your issue. I shall come back to you with findings.
Thank you for your patience.
Best Regards,
Nazrul Naim
- VishalAvg
  New Contributor
  2 years ago
  ok..
VishalAvg
New Contributor
2 years ago
still do not get any reply.
FvM
Super Contributor
2 years ago
Hi,
EK-10M08E144 needs an external USB-Blaster or compatible programming adapter. There are other economic MAX10 development modules with built-in USB Blaster function, e.g. this one
https://shop.trenz-electronic.de/en/TEI0001-04-DBC83A-MAX1000-IoT-Maker-Board-8kLE-8-MByte-SDRAM-8-MByte-Flash-6.15-x-2.5-cm?c=21

Regards
Frank
- VishalAvg
  New Contributor
  2 years ago
  Thank you so much for confirmation.
  I has ordered DE-10 Lite (Terasic board) because my company works on Max10 10M02 fpga chip.
  So I need the board which are related to this chip only.
NazrulNaim_Intel
Regular Contributor
2 years ago
Hello,
I’m glad that your question has been addressed, for now I will set this case to Close-Pending.
Regards,
Nazrul Naim