Forum Discussion

Sathvika's avatar
Sathvika
Icon for New Contributor rankNew Contributor
2 years ago

JTAG pin connections for MAX 10 FPGA

I am making a design using 10M08SAE144C8G. Below is the schematic reference I am using . https://www.intel.com/content/dam/support/us/en/programmable/support-resources/fpga-wiki/asset01/bemicro-ma...
Fpga Devkit
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 years ago

Hi,
pin planner shows only JTAG signal pins, GND and VCC need to be also connected. For complete wiring of programming connector,
refer to MAX10 Device Handbook.

Additional pins are dedicated for AS memory programming, which has no function for MAX10.