Forum Discussion

Sathvika's avatar
Sathvika
Icon for New Contributor rankNew Contributor
2 years ago

JTAG pin connections for MAX 10 FPGA

I am making a design using 10M08SAE144C8G. Below is the schematic reference I am using . https://www.intel.com/content/dam/support/us/en/programmable/support-resources/fpga-wiki/asset01/bemicro-ma...
Fpga Devkit
Sathvika's avatar
Sathvika
Icon for New Contributor rankNew Contributor
2 years ago

I am not sure, where this pin planner and legend if at. Maybe it is in different software.

I am using altium to design the board.

Below is the jtag connector header.

I am confused in connecting these JTAG J161A nd J161B pins to which pins of FPGA(10M08SAE144C8G).

Please help me with just these 10 connections of JTAG.

sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
2 years ago
In Quartus, use the Pin Planner from the Assignments menu.
  • Sathvika's avatar
    Sathvika
    Icon for New Contributor rankNew Contributor
    2 years ago

    Thanks for your help. I just installed quartus, but the pins I have from jtag are not matching with all the FPGA JTAG pins. Is there a way to meet over webex to discuss in 10min? It would be really helpful to close this item quickly if we do so.

    • Sathvika's avatar
      Sathvika
      Icon for New Contributor rankNew Contributor
      2 years ago

      From the usb blaster there are 10 pins coming out like below.

      But in these 10 pins, TCK, TDO, TMS, TDI are going to FPGA according to quartus pin planner. What to do with other pins coming from USB blaster?

      • Sathvika's avatar
        Sathvika
        Icon for New Contributor rankNew Contributor
        2 years ago

        Can someone update for the above.

        Thanks

        Sathvika