Forum Discussion
Junyong
Occasional Contributor
Occasional Contributorjtag id issue
Hi all, When I'm tyring to program Stratix10 Tx development kit, it failed with following error message: Error(18941): Can't configure device. Expected JTAG ID code 0xC323D0DD for device 1, but fou...
FvM
Super Contributor
Super ContributorHi,
you are apparently directing the Stratix .sof file to MAX10. As the message tells, edit chain description.
Or modify dev board DIP switches and take MAX10 out of JTAG chain.
you are apparently directing the Stratix .sof file to MAX10. As the message tells, edit chain description.
Or modify dev board DIP switches and take MAX10 out of JTAG chain.
JunyongOccasional Contributor
Occasional ContributorThank you FvM,
The issue I addressed was resolved.
Unfortunately, I have another issue during programming.
So could you please let me know how to handle with the following issue?
Error(18948): Error message received from device: Device is in configuration state.
Error(18950): Device has stopped receiving configuration data
Best Regards,
Junyong
