Forum Discussion

Occasional Contributor

6 years ago

Is an ARM processor necessary to do HDMI on a FPGA?

Hello, I'm looking to do a design that will have an HDMI connection. I'm looking to use the Arria 10. Should I choose the Arria 10 with embedded ARM cores or is that not needed to implement HDMI? Als...

Deshi_Intel

Regular Contributor

6 years ago

HI,

There is no restriction on "MUST use" Arm processor to interact with Intel FPGA HDMI IP core. Feel free to use anything you like.

We do have one HDMI reference design on Arria 10 dev kit board that pair with Bitec daughter card. You can checkout below apps note doc.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an776.pdf

Thanks.

Regards,

dlim

Forum Discussion

Is an ARM processor necessary to do HDMI on a FPGA?

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector