Forum Discussion

New Contributor

1 year ago

https://www.intel.com/content/www/us/en/support/programmable/articles/000076366.html?wapkw=calibrati

https://www.intel.com/content/www/us/en/support/programmable/articles/000076366.html?wapkw=calibration fail : seq c As above link suggests: I am using Quartus prime v16.1 to program a .bin image fi...

Board Debug

tehjingy_Altera

Regular Contributor

1 year ago

If you are using a custom board you could not use the GSRD that is available.

You would need to change the quartus project emif parameter and the device tree below:

https://github.com/altera-opensource/u-boot-socfpga/blob/ff416d887f993e0b0cd2f14cb2fb6b486ad6682f/arch/arm/dts/socfpga_cyclone5_sockit.dts#L6

Line 17 to 20

Regards

Jingyang, Teh

Forum Discussion

https://www.intel.com/content/www/us/en/support/programmable/articles/000076366.html?wapkw=calibrati

Recent Discussions

Regarding Quartus Prime License Activation for the Agilex 5 Evaluation Kit

Stratix 10 FPGA Dev Kit VCCIO_FMC voltage issue

DE10-Lite unable to flash?

Mandelbrot viewer on Cyclone V - Platform Designer layout

A question about reading the configuration space of the R-Tile PCIe IP EP