Forum Discussion

Occasional Contributor

6 years ago

How to program the NOR Flash devices on the Cyclone 10 GX development kit

I'm generating a POF for CFI_2Gb (auto-detect shows 2*CFI_1Gb) and it fails to get written on the flash device. Erase was successful though. Is there a document that shows how to program the Flash ...

ShafiqY_Intel

Frequent Contributor

6 years ago

Hi JBayl,

If you want to restore the original MAX 10 design, go to <installation directory>\cyclone-10-gx-kit-collateral\examples\system_max10 and program the max10.pof.

Kit collateral link = https://www.intel.com/content/dam/altera-www/global/en_US/support/boards-kits/cyclone10/cyclone-10-gx-kit-collateral.zip

This will help you to restore the development board to its factory default.

Cheers

Forum Discussion

How to program the NOR Flash devices on the Cyclone 10 GX development kit

Recent Discussions

Agilex5 Eagle ES, NIOS-V + TSE IP

CXL 2.0 support on the NEW Agilex™ 7 FPGA I-Series Development Kit (2x R-Tile and 1x F-Tile)

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Agilex5 HPS2FPGA usage