Forum Discussion

JBayl's avatar
JBayl
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

How to program the NOR Flash devices on the Cyclone 10 GX development kit

I'm generating a POF for CFI_2Gb (auto-detect shows 2*CFI_1Gb) and it fails to get written on the flash device. Erase was successful though. Is there a document that shows how to program the Flash ...
JBayl's avatar
JBayl
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Hi Shafiq,

I think the PFL IP is still in the Max10 because Quartus can erase the 2*CFI flash but fails whenever its in the programming step. I've selected 1Gb and 2Gb for the sof to pof conversion and both generated POF aren't working. Is there a special step for "2*CFI"?

AS4 configuration works OK and I've been using it for development. What I'd like to do is restore to the development board to its factory default.

r/joel