Forum Discussion

JBuch's avatar
JBuch
Icon for New Contributor rankNew Contributor
6 years ago

How to get *.jic to work on Cyclone 10 lp Dev board

After connecting a USB Blaster to the dev board's JTAG connector and setting dip(4) to off, I added the flash-loader ip to my simple dff design. I synthesized everything and created a *jic file to th...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

If you have make the changes in the SW1.4 then you shouldn't observed VTAP10 in your JTAG chain. Could you performed auto-detect again to make sure that you no longer observed VTAP10 in your chain before you start program your jic file.