Forum Discussion

New Contributor

6 years ago

How can I update Intel FPGA SDK for OpenCL 19.2?

I use Intel PAC with Arria10 GX FPGA with Dell PowerEdge R740 from this July. I installed Intel Acceleration Stack Version 1.2 this July. - Intel FPGA SDK for OpenCL 17.1.1 ...

MEIYAN_L_Intel

Frequent Contributor

6 years ago

Hi,

According to https://www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/acceleration-card-arria-10-gx/getting-started.html ,Intel Acceleration Stack Version 1.2 is supported in the Intel Quartus Prime Pro Edition software version 17.1.1 only.

Also, there is no license required for the Intel FPGA SDK for OpenCl according to the link below:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/support-centers/licensing.html

Thanks

Forum Discussion

How can I update Intel FPGA SDK for OpenCL 19.2?

Recent Discussions

SyncE clock as the reference for DDR, HBM, and FPGA control interfaces in the Agilex M-Series design

PCIe Root Complex on DK-A5E013BM16AEA

Agilex™ 7 FPGA M-Series Development Kit_HBM2e Edition_REVB2_Altera

Agilex 7 R-Tile PIPE Direct endpoint receives Set_Slot_Power_Limit, but no Config TLPs

R-tile CXL base hard IP example for the Agilex 7 M-series Dev Kit (DK_DEV_AGM039EA) does not work