Forum Discussion

sm110's avatar
sm110
Icon for New Contributor rankNew Contributor
2 years ago

CycloneXLP device

It is observed that all the outputs of cyclone X Lp device goes to high state till the configuration is completed. This will be a problem when the output is driving a device which require low on powe...
Fpga Devkit
FvM's avatar
FvM
Icon for Super Contributor rankSuper Contributor
2 years ago

Hi,
review device handboook to understand about weak pullup at unconfigured pins.

If you want low level at power-on, place a pulldown-resistor, e.g. 1 - 2k.