Forum Discussion
S_Healthineers
New Contributor
New ContributorCyclone V Transceiver Native PHY IP Core
Hello, by the Cyclone V Transceiver Native PHY IP Core is the Transceiver Reconfiguration Controller optional ? can i left the Reconfiguration output signals Open and the inputs putted to zero. PS ....
SengKok_L_Intel
Regular Contributor
Regular ContributorYes, you just need to hook up the signals accordingly, and control only the clk and reset signals will do.
Regards -SK Lim
S_HealthineersThanks SK Lim 😊
