Hello, I am working on a project which requires the Cyclone V 5CEFA4F23C7 Device. I am not able to find the user guide or datasheet related to this device. Please refer any document if available for reference. Also I want to know the which vendor & part number of the DDR3 SDRAM Memory is used for Cyclone V 5CEFA4F23C7. For simulation I would require the Memory Model of the DDR3 SDRAM. For that I would require the exact part number being used for this board. Device Family: Cyclone V Part No: 5CEFA4F23C7 Please share the documents related to this device. Regards, Himanshu

Hi Himanshu,I assume you are using Cyclone V E Development Kit from Intel : https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/cyclone/v-e.html If you are wondering where to get the DDR3 part number, you can always check in the schematic file of the board. For example in the snapshot I have attached, there is a part number under DDR3 Device component which is MT41J128M16JT-125. I hope that help you out. Regards, Adzim

Cyclone V 5CEFA4F23C7 User Guide and DDR3 SDRAM Part Number

5 Replies

AdzimZM_Altera
Regular Contributor
2 years ago
Hi Himanshu,

The related documents for Cyclone V device can be accessed through this link: https://www.intel.com/content/www/us/en/products/details/fpga/cyclone/v/docs.html

If you are looking for EMIF IP User Guide for Cyclone V device, please look for External Memory Interface Handbook. For example here : https://www.intel.com/content/www/us/en/docs/programmable/683841/17-0/functional-description-uniphy.html

There are no specific memory devices assigned to Cyclone V FPGA device. Any memory devices can be used with the FPGA as long as it is supported.
If you are mean for a board, can you let me know which board that you are referred to?

Regards,
Adzim
- himanshuvaria
  Occasional Contributor
  2 years ago
  Hello,
  
  Thank you for the response.
  
  I am using the Cyclone V E Development Kit : 5CEFA4/5CEFA7
  
  I want to know the Micron DDR3 part number for this device. Please share your feedback on this.
  
  Best Regards,
  
  Himanshu
  - AdzimZM_Altera
    Regular Contributor
    2 years ago
    Hi Himanshu,
    
    I assume you are using Cyclone V E Development Kit from Intel : https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/cyclone/v-e.html
    
    If you are wondering where to get the DDR3 part number, you can always check in the schematic file of the board.
    
    For example in the snapshot I have attached, there is a part number under DDR3 Device component which is MT41J128M16JT-125.
    
    I hope that help you out.
    
    Regards,
    
    Adzim
himanshuvaria
Occasional Contributor
2 years ago
Thankyou for the response. It did worked out for me.
AdzimZM_Altera
Regular Contributor
2 years ago
I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Forum Discussion

Cyclone V 5CEFA4F23C7 User Guide and DDR3 SDRAM Part Number

5 Replies

Recent Discussions

Stratix 10 Development Kit HiLo connector

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

About PCIe Daughter Cards for Agilex™ 3 FPGA and SoC C‑Series Development Kit

DE10-Lite unable to flash?

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).