Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Cyclone III Starter Board - CFI programming

Hi, I tried to program the Intel P30 flash device following the instructions of the Cyclone III FPGA Starter Kit User Guide in Appendix A but the Quartus II Programmer shows three errors and th...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi!

Maybe it's too late by now, but I had the same problem today. I figured out, that you have to choose a PFL image for the Cyclone device to be able to program the flash memory with a *.pof file. You can find the images at ../quartus/common/devinfo/programmer.

Hope this helps!

Michaela