Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Cyclone III LVDS clocking

I am interfacing an ADC (AD9461) to the HSMA breakout board on my Cyclone III dev board. The ADC is 16-bits clocked at 7MHz. I measured this LVDS signal at 1.5V high and 1.0V low, which I assume co...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Good luck mate. I believe that you can program the GPIO pins. :)