Forum Discussion

manishkumar's avatar
manishkumar
Icon for New Contributor rankNew Contributor
1 year ago

Cyclone® V FPGA – Remote System Upgrade over UART Based on Nios® II Processors with EPCQ Design Exam

with given reference design example try to program the output_file.jic file through Quartus prime programmer as per the reference user manual in to the (Cyclone V E FPGA Development Kit) , but it is...
Fpga Devkit
NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
1 year ago

Also, when you click auto detect, what is the device showed? Is it the same as your first post?


Regards,

Aiman


manishkumar's avatar
manishkumar
Icon for New Contributor rankNew Contributor
1 year ago

Hi,

when doing autodetect, 5CEFA7 showed.

previously without disabling other devices, 5M2210 is also showed along with 5CEFA7 in series.

kindly provide the solution to program .jic image through jtag