Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorConfiguring the Stratix2 device
Hi, Am using stratix2 device in my design. I have configured bank3 lines as LVDS inputs, however with this configuration am not able to program the device. I get the error nCE pin didn't g...
Altera_ForumHonored Contributor
Honored ContributorHi,
Using In-System Memory Content Editor you should be able to read the content of the RAM once u configure the design into FPGA. In the 'JTAG Chain Configuration' on window select approprate Hardware and Device. In the In-System Memory Content Editor windown right click on the Device and click on Read Data from In-System Memory or Continiously Read Data from In-System Memory.
