Forum Discussion

kiransr's avatar
kiransr
Icon for Occasional Contributor rankOccasional Contributor
1 year ago

Configuring Stratix 10 SOC FPGA

Is it possible to program the Stratix 10 SOC FPGA present in the Stratix 10 SX SOC Devlopment kit without any firmware and HPS FSBL / SSBL. What I mean is programing FPGA only with hardware sram obj...
Fpga Devkit
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
1 year ago

Hi


Yes, you are able to program the FPGA configuration only without the HPS.

In your Quartus project, you could just skip adding the HPS Hard IP into your project.


Regards

Jingyang, Teh


  • kiransr's avatar
    kiransr
    Icon for Occasional Contributor rankOccasional Contributor
    1 year ago

    Hi Jingyang Teh,

    Thank you for the answer.

    I need a clarification, in quartus where there is only hardware project no processor (hard / soft), once it's compiled and assembler generates a .sof file, only using this file in quartus programmer in the JTAG mode FPGA can be programmed is that right.

    No need of converting this .sof file to any other format, it can be used as is for configuring FPGA through JTAG in FPGA first boot mode, is this correct step or not please advise.

    Regards,

    Kiran

  • kiransr's avatar
    kiransr
    Icon for Occasional Contributor rankOccasional Contributor
    1 year ago

    Hi Jingyang,

    Thank you for the answer,

    I have .sof file generated from quartus prime pro tool, just using micro usb jtag port on the stratix10 soc fpga development kit am unable to program, how it can be done, let me know.

    Regards,

    Kiran