Forum Discussion

ricj's avatar
ricj
Icon for New Contributor rankNew Contributor
2 years ago
Solved

Booting Cyclone IV from S25FL064L Flash

I am trying to boot a Cyclone IV from Infineon's S25FL064L flash. When generating a .jic file, Intel does not provide built-in support for the S25FL064L device, so I had to define my own configurati...
Fpga Devkit
  • ricj's avatar
    ricj
    2 years ago

    Attached in the picture below are the configurations that worked in the end.
    Make sure to power-cycle the FPGA/DUT after programming the flash. Thanks!

FakhrulA_altera's avatar
FakhrulA_altera
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hi ricj,


Thank you for reaching out with your question about booting a Cyclone IV from Infineon's S25FL064L flash. Based on your inquiry and the update you provided, it seems you've successfully resolved the issue.


We appreciate your update with the working configuration, which will be valuable for others facing similar issues.

Thank you for sharing your findings, and if you have any further questions or need additional assistance, please feel free to reach out.