NZhan1
Occasional Contributor
Occasional ContributorArria 10 PS configuration
Hi since there is no separate MSEL setting that differentiates PS mode from FPP mode, is there a fast mode in A10 PS ? What the timing spec of this mode?
Forum Discussion
YuanLi_S_Intel
Regular Contributor
Regular ContributorHi Nicole,
Yes, FPP is fast mode. To enable this, you will need to set it in Quartus.
FPP / PS configuration timing:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/a10_handbook.pdf (Page 255)
You may determine the configuration time from link below:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/arria-10/a10_handbook.pdf (Page 256)
