Forum Discussion

TSchu3's avatar
TSchu3
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Arria 10 Gx board, SFP connection no link

Hello all, I am attempting to bring up a link on a new Arria 10 Gx board, using the SFP+ connector. I started by generating an example design for the Low Latency Mac, with the 1G/2.5G Ethernet Examp...
Fpga Devkit
TSchu3's avatar
TSchu3
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

As stated in my last response- changing to USXGMII results in no link. It is not working.

I want to know what the current speed is. As stated already I am plugged into 1G devices. It is impossible to be connected at 10G.

How do I determine the current operating speed, not the default speed?


This is exactly what I am asking about. It always states that the Operating speed is 10G.
"For further information about the operating speed, you may refer to Section 2.6.5.5.2. Operating Mode and Speed Signals, Table 162. Transceiver Mode and Operating Speed Signals, https://www.intel.com/content/www/us/en/docs/programmable/683617/21-1/operating-mode-and-speed-signals.html"