Forum Discussion

New Contributor

7 years ago

Altera USB Blaster on Windows 10 code 39 error

I have a Terasic DE0-Nano Cyclone IV with built-in USB Blaster. I am using: OS: Windows 10 Pro Version: 1809 Build: 17763.316 I have tried to USB Blaster driver from Quartus II 9.1, 13.0, 13.1, ...

Vicky1

Regular Contributor

7 years ago

Hi Stephen, Could you please update the USB-Blaster drivers? Refer the "Installing the USB Download Cable Driver on Windows" from the below link & video too. https://www.intel.com/content/www/us/en/programmable/documentation/nfa1418282998564.html https://www.youtube.com/watch?v=QGcikqzV064 Please let me know if you have different concern. Regards, Vikas

kozakoff
New Contributor
7 years ago
Hi Vicky,
The problem I described in the original post is after updating the driver as described in the link below. Sorry I wasn't more clear about that.
https://www.intel.com/content/www/us/en/programmable/documentation/nfa1418282998564.html?language=en_US#nfa1426741853388
Thanks,
-Steve

Forum Discussion

Altera USB Blaster on Windows 10 code 39 error

Recent Discussions

Device stopped receiving config data: Internal error (0x0000, 0x00000000, 0x1800).

Mandelbrot viewer on Cyclone V - Platform Designer layout

Slow Runtime Performance in FIL Implementation on DE2-115 Using Ethernet

Stratix 10 GX SI Board - issue with the Board Test System (BTS)

Stratix 10 Development Kit HiLo connector