Forum Discussion

Rok's avatar
Rok
Icon for New Contributor rankNew Contributor
6 years ago
Solved

BittWare Toolkit Lite

Hi, We have an Intel Arria 10 PAC card with version 1.1 FIM and BMC firmware that would require an upgrade to version 1.2. I have been informed by a BittWare representative that since July 31 2020,...
  • druva1's avatar
    druva1
    Icon for Occasional Contributor rankOccasional Contributor
    5 years ago

    Hi,

    I have the same issue but I have a Windows machine, Could I get the Windows version?

    I am actually just interested in the driver and the pinout of the board so I can use Quartus Pro to program the board.

    cheers

  • Rok's avatar
    Rok
    Icon for New Contributor rankNew Contributor
    5 years ago

    Dear Eric,

    Thank you very much. I am happy to report that the upgrade has been successful. I was not able to boot Ubuntu 16.04 nor CentOS 7.4 on our machine, but I was able to force install the package on Ubuntu 18.04 and run the upgrade procedure (using legacy kernel). I followed this up with an update to FPGA stack 1.2.1 and then with oneAPI installation. It all works fine, we are now able to offload calculations to the FPGA accelerator in modern C++ code.

    Thank you very much for assistance!

    Kind regards,
    Rok