Most RecentWhy do I get the error Internal Error "No Active Family" when trying to generate a programming JAM file via command line "quartus_pfg"Why True Differential input buffer with on-chip differential Termination (RD OCT) enabled does not respond after device is configured for Agilex® 3 FPGA, Agilex® 5 FPGA, and Agilex® 7 FPGA devices?Error (20783): Open Drain option is set to 'ON' for pin [pin name], but the setting is not supported by I/O standard 1.2‑V. File: [location]Why is data packet loss due to CRC error observed in Agilex® 5 and Agilex® 3 TSN XCVR SGMII 1G mode?Why am I seeing the Error: pgm_q_inst_intel_niosv_g_0_platform_irq_rx_bfm_ip.pgm_q_inst_intel_niosv_g_0_platform_irq_rx_bfm: "Irq width" (AV_IRQ_W) 2048 is out of range: 1-32?Why does the HDMI Design Example fail to generate when using the Quartus® Prime Standard Edition Software version 24.1?Why the Agilex® 5 FPGA Hard Processor System CoreSight Trace is not working?Why does functional failure occur after performing external scrubbing in Agilex® 5 FPGA devices?Error(14566): The Fitter cannot place <amount> periphery component(s) due to conflicts with existing constraints (<amount> LVDS_CHANNEL(s))Why do I see a “rx_dpa_hold” pin when “RX SOFT-CDR” mode is selected in the Stratix® 10 FPGA LVDS SERDES IP?
