Most RecentReset Synchronization ProblemWhy can't I access the Intel® Arria® 10 device through the JTAG interface when using Active Serial configuration mode?What does “Not Applicable” indicate in the Pin Tolerance – Power-Up / Power-Down tables of Intel® Arria® 10, Intel® Stratix® 10, and Intel® Cyclone® 10 GX User Guides?Tcl error: ERROR: Argument <clk_object> is a collection with more than one object. Specify a collection with one object. while executing "get_clock_info -period [get_clocks [lindex $fclk_setting_name 0]]Error (169187): Following feature(s) of I/O pin has invalid setting(s) in the configuration scheme ACTIVE_SERIAL when the pin is placed at pin location Info (169189): I/O feature 'Current Strength' has an invalid setting. The setting should be Default.Possible Simulation Failure in Skip Calibration ModeWhen are the internal weak pull-up resistors enabled during power up for Cyclone® III and Cyclone® IV devices?What are the maximum and minimum clock frequencies when driving the EDCRC block from user logic?Do additional power-up transient currents need to be added to the Early Power Estimator (EPE) or Power Play Power Analyzer (PPPA) reports for Stratix V devices?Should clocks and resets in user logic be gated until the configuration process is completed in Intel® Stratix® 10 devices?
