Most RecentUnable to Program MAX7000S using Quartus II programmerfpga上电通过AS-4的方式从flash加载后，进入用户模式，PCIE就能正常工作，如果需要通过PCIE更新用户逻辑(updata模式)，需要将PCIE切换到CVP模式，请问如何到切换CVP模式？以及PCIE的CSR和VSEC寄存器如何控制加载？谢谢design store example AN881: PCIe AVMM DMA Gen3x16 DDR4 and HBM2 can not compile in quartus 19.41G/10GbE IP works on 1G/10G mode with auto-negotiation turned offWhat is the maximum Avalon memory-mapped interface data width supported for MAX 10 device?NIOS debug methodArria V Development Kit... Has *anybody* ever got the "Board Test System" to work, being that it comes default looking for a "5AGGXFB3" FPGA. Seems that the actual DevKit comes with a "5AGXFB3" (only one "G"). Makes it hard to use.Want to access single port ram using python in HPS ;how to access internal memory in FPGA from HPS using python ?Using the -add_delay switch
