Why in using the Simulation waveform editor of Quartus 19.1 gives me that the excutable file of mod

Question

Why in using the "Simulation waveform editor" of Quartus 19.1 gives me that the excutable file of modsim is not found. I don't want to use modelsim, I want to use .vwf files to run the simulation.
Must I install Modelsim also?

richardt_altera · Answer

The case will be closed because it was a duplicate with an existing case. Please refer to the case below (link attached) for further support.
https://community.intel.com/t5/Intel-FPGA-Software-Installation/Simulation-waveform-editor-of-Quartus-19-1-problem/m-p/1278302#M2704

Best Regards,
Richard Tan

p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

Best Regards,Richard Tanp/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

Forum Discussion

Why in using the Simulation waveform editor of Quartus 19.1 gives me that the excutable file of mod

1 Reply

Recent Discussions

Cannot find download location for Quartus Prime Lite 19.1

Unable to checkout 'intelqsimstarter' license

DE1-SoC to connect a camera via USB

Arria10 Transceiver Oversampling

Donation fpga boards