Forum Discussion

wschoong's avatar
wschoong
Icon for New Contributor rankNew Contributor
5 years ago

USB on Cyclone V GT FPGA Development Kit

I need assistance on implementing the USB interface on the Cyclone V GT FPGA Development Kit. I understand that the board has a Cypress CY7C68013A connected to the FPGA through a MAX II CPLD. By defa...
NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
5 years ago

Hi,


Sorry for the misunderstanding.

This might happen when you are using Cypress utility (Cypress Control Center) as this is 3rd party device.

I would like to suggest to use Quartus Programmer to run the project.

https://fpgasoftware.intel.com/


Regards,

Aiman