Forum Discussion

wschoong's avatar
wschoong
Icon for New Contributor rankNew Contributor
5 years ago

USB on Cyclone V GT FPGA Development Kit

I need assistance on implementing the USB interface on the Cyclone V GT FPGA Development Kit. I understand that the board has a Cypress CY7C68013A connected to the FPGA through a MAX II CPLD. By defa...
NurAiman_M_Intel's avatar
NurAiman_M_Intel
Icon for Super Contributor rankSuper Contributor
5 years ago

Hi,


Thank you for contacting Intel community.


Kindly refer to Cyclone V GT development kit userguide and USB Blaster userguide:


Cyclone V GT: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_cvgt_fpga_dev_kit.pdf


USB Blaster: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr.pdf


USB Blaster II: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf


Let me know if you need further information.


Regards,

Aiman


  • wschoong's avatar
    wschoong
    Icon for New Contributor rankNew Contributor
    5 years ago

    I have already gone through the relevant documentation and I cannot find any information regarding my specific problem. I cannot find any information regarding implementing a USB to FPGA interface on the development board, which seems to be feasible from the schematics.