Forum Discussion

New Contributor

6 years ago

Trouble with programming EPCQ via JTAG interface, cannot find flash loader.

Hello, I am trying to program an EPCQ4A through an FPGA (10CL006ZE144). When I go to create the .jic file, the flash loader for my FPGA is not listed. The closest I can find is 10CL006Z, and when I...

ShafiqY_Intel

Frequent Contributor

6 years ago

Hi THuyn18,

Can you kindly try to reduce your TCK frequency to 6 MHz ?

Below link is the command to change TCK frequency (on page 14= 2.8. Changing the TCK Frequency)

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf#page=14

Kindly try it out with your design and let me know the result.

Thanks

THuyn18

New Contributor

6 years ago

Hi Wolfgang,

I tried it and nothing changed. Am I supposed to recreate the jic file after changing the frequency?

Tin

Forum Discussion

Trouble with programming EPCQ via JTAG interface, cannot find flash loader.

Recent Discussions

Cannot find download location for Quartus Prime Lite 19.1

Unable to checkout 'intelqsimstarter' license

DE1-SoC to connect a camera via USB

Arria10 Transceiver Oversampling

Donation fpga boards