Forum Discussion
THuyn18
New Contributor
New ContributorTrouble with programming EPCQ via JTAG interface, cannot find flash loader.
Hello, I am trying to program an EPCQ4A through an FPGA (10CL006ZE144). When I go to create the .jic file, the flash loader for my FPGA is not listed. The closest I can find is 10CL006Z, and when I...
ShafiqY_Intel
Frequent Contributor
Frequent ContributorHi THuyn18,
Can you kindly try to reduce your TCK frequency to 6 MHz ?
Below link is the command to change TCK frequency (on page 14= 2.8. Changing the TCK Frequency)
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf#page=14
Kindly try it out with your design and let me know the result.
Thanks
THuyn18Hi Wolfgang,
I tried it and nothing changed. Am I supposed to recreate the jic file after changing the frequency?
Tin
