Forum Discussion

New Contributor

4 years ago

Quartus 18.1 Standard Edition - Altera Cyclone V Family

Hello all, I have installed Quartus 18.1 Standard Edition and the required Cyclone V files from the Intel download center. When I open a new project via project wizard there are no devices shown...

Nurina

Regular Contributor

4 years ago

Hi Tom,

After downloading the Cyclone V files, you need to install them on Quartus. You can refer to this Quick Start Guide for the steps you need to take, it's available on the last page: https://fpgasoftware.intel.com/static/quick_start_guide/quick_start_guide_18.1_en.pdf

I hope this resolves your problem.

Best regards,

Nurina

Tom_BGU

New Contributor

4 years ago

Hello!

Thanks for the reply.

I have installed the Cyclone V package via the Quartus 18.1 Device Installer.

Still, when I try to open a new project, the device list is completely empty

Tom

Forum Discussion

Quartus 18.1 Standard Edition - Altera Cyclone V Family

Recent Discussions

Cannot find download location for Quartus Prime Lite 19.1

Unable to checkout 'intelqsimstarter' license

DE1-SoC to connect a camera via USB

Arria10 Transceiver Oversampling

Donation fpga boards