Forum Discussion

kopdcom's avatar
kopdcom
Icon for New Contributor rankNew Contributor
3 years ago

PROBLEM LOADING with MONITOR PROGRAM 18.1 TO DE2-115

Hello, I am following the tutorial that presents an introduction to PLATFORM DESIGNER tool (link bellow) https://ftp.intel.com/Public/Pub/fpgaup/pub/Teaching_Materials/current/Tutorials/Introduc...
kopdcom's avatar
kopdcom
Icon for New Contributor rankNew Contributor
3 years ago

Dear Sheng,

It is written in the first page of this tutorials:

"In this tutorial it is assumed that the reader has access to the Intel DE1-SoC Development and Education board, connected to a computer that has Quartus Prime and Nios II Embedded Design Suite (EDS) software
installed".

But in our Lab, we have just the DE2-115 board. So I want to know if this tutorial is just for the DE1-SoC Board or I can try it on DE2-115.

Regards...

ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Hi,

Yes. The configuration in that particular tutorial is just mainly for DE1-SoC Board. There are also other systems available for Monitor Program which are DE0-CV, DE0-Nano, DE0-Nano-SoC, DE10-Lite and DE10-Nano.


Best regards,
Sheng

p/s: If any answer from the community or Intel Support are helpful, please feel free to give best answer or rate 4/5 survey.